Projects Update: May 2020

What happened to May?

Just at the end of April I finished the coaster project and I was feeling pretty pleased with myself. I didn’t get quite through everything I wanted in April, but I was pretty happy. Then it was halfway through May and I had no idea where I was or what was going on. I will say I’ve been enjoying spring for the most part, although there’s been some quarantine weirdness kicking around my brain as well.

I'm really happy with the new coasters.

I haven’t made a lot of progress on the game tracker and I’ve found it pretty hard to sit down and write, so I’m behind on both of those for now. I’ve also picked up an academic thing I need to finish fairly quickly, so I’m thinking about that too.

Since I haven’t made much progress I’m just going to slide my goal for the game tracker back to June 30. The goal is to have remote storage of data working by that point (along with having tutorial myself on various build systems and remote storage solutions.

I also want to push forward on my Chrono Trigger sprites so I’d like to get Lucca finished by June 15.

Project 5: SNES Coasters - Update - Larger and ... newer?

So this is an update from the last update in 2014, but it’s an update. That being said, having taken … 6 … years to finish this project a lot of my thinking is totally lost to me now. Still I’ve made newer bigger coasters and they seem pretty good.

The Coasters

The original coasters.

I set out to make coasters because I wanted to play with pixels and to make myself some geeky stuff. The first set of coasters have been pretty good, but they are a little small. They’re pretty good with tumblers or a can, but they’re a little small for mugs. They also worry me a bit whith wine glasses, so I tend not to have them out when we have guests over. They have always had a bit of a curve or a cup to them, which, so far I think is the nature of something made out of perler, which makes them a little bit prone to tipping.

They’ve held up quite well over the years. I took an inventory and a few have a bit of separation between the backing and the beads, but all 8 of the original set get use everyday.

One of the blue coasters where I use it daily.

The cupping always bothered me a bit and the size has also been a small problem. So a long time back I figured adding in an extra ring of beads (taking the width from 16 bead x 16 to 18 x 18) would fix the size problem. I’m also hoping that the bigger coasters will also help with cupping, but since that seems to develop over time I don’t have a great answer for that yet.

Pattern

For the pattern I added in an extra ring of the interior colour. That helps actually float the exclamation mark more in the middle so I think overall the bigger sprite makes sense.

I didn't generate a pattern, but here's the expanded layout. You can see the extra row above the exclamation point) which effectively wraps around the whole coaster.

To compare here's the original coasters with the completed larger ones:

All of the originals with the newer ones behind.

For each I used the perler colours: 

The Black and White are Black (80-19018) and White (80-19001).

The Red:

Sprite Colour	Bead Colour
Outer Red	Red (80-19005)
Inner Red	Magenta (80-19038)

Red Coaster - click to enlarge

The Blue:

Sprite Colour	Bead Colour
Outer Blue	Dark Blue (80-19008)
Inner Blue	Turquoise? (80-19062)

Blue Coaster - click to enlarge

The Green:

Sprite Colour	Bead Colour
Outer Green	Dark Green? (80-19010)
Inner Green	Green? (80-19080)

Green Coaster - click to enlarge

 The Yellow:

Sprite Colour	Bead Colour
Outer Yellow	Cheddar (80-19057)
Inner Yellow	Yellow (80-19003)

Yellow Coaster - click to enlarge

Any of the beads where I'm either not sure what bead I used, or what colour the bead is I've marked with a question mark. Those are best guesses.

I also had a bit of an adventure and made a rainbow exclamation mark block. I have a lot of beads kicking around that aren’t really getting used for anything so I thought it would be fun to make up my own. 

 

The Rainbow Wonder. The white ring matches the extra row of beads if you're curious as to size.

I didn’t take notes, so I have no idea what colours I actually put in here.

Fusing

I fused three of these at least a year ago and the other two in the last few days.

For the ones I did in the last few days, I also made some shapes out of the same beads so I had a feeling for how those beads melted. I’ve noticed a bit over time that the different colours have slightly different melting / fusing points.

I also noticed for future reference that depending on how I fuse the beads the depth of the coaster can be pretty different. It doesn’t show so much from the front, but it’s a factor I hadn’t really considered. For the future I’d like to find a way to be more systematic about fusing.

The different depths of the different coasters.

Backing

I used the same backing as I did for the original coasters. Which I do mean literally, they’re the same set of sticky felt that I purchased back in 2013 (2012?). So they might not work as well as I’d like. But it’s what I had and given that going out to the craft store is not an option while I’m working, I figured I’d go with what I had.

As it works out the 18 x 18 bead squares are exactly 3 ½ inches wide. So I proceeded to cut a bunch of squares that were *almost* 3 ½ inches square. I have a new cutting mat that’s a little warped still and I guess I just need more practice (and maybe a bit more technique). 

The fit of the red coaster. The cutting matt is a little wonky underneath.

 

I also realized that 3 ½ inches is too wide, because it doesn’t allow for the edge where the beads hang over the backing. I tried to make that a ½ bead overhang and it seems like cutting the squares to be 3 ⅜ inches would have been a better approach. I also had to trim the corners to deal with the curve. I found it was a bit difficult to get a proper trim, so I think if I do more of these it would make sense to have a template or a jig.

The coaster backs.

So the backs are a little adhoc, despite my best efforts, but they seem to be on comfortably despite all of the potential problems. I’ll use them for a bit and then update to see if the backing actually works, but given how long the smaller coasters have lasted I’m feeling a little optimistic.

Coaster with the backing on.

Wrap-up

These were fun to do. The several times I’ve worked on them over the last (checks notes) half decade, I’ve enjoyed it. Filling in the fields is a very peaceful activity, especially when compared to my Chrono Trigger perler sprites. 

 

The four coasters ready for action.

Now I’m going to use them for a bit and see how they do. In the mean time I get to mark this project done.

And now time to relax.

Project 5: SNES Coasters: Update (and Wrap Up?)

I may have missed the deadline by a few (many) months, but I have finally finished making my first batch of SNES Coasters.

The Pattern

After taking a look at a sprite sheet from Super Mario World. I opted for the exclamation point blocks. I did this for a few reasons. One, they were probably my favorite block in the game (if you can have favorite blocks), secondly they come in 4 colours (green, yellow, blue and red) so they have a little diversity in their appearance.

The Beading

They were also quiet easy to build, since they only require you to build the exclamation point and then fill in a field of colour before putting on a coloured border and a black outer border. After a little bit of work I figured out that the easiest way to create the exclamation mark is to put in the black beads for the upper left hand side of the border, then fill in the top rows of white beads. After that I add the bottom square of four white beads with the surrounding black boarder and finish the right hand side of black beads. Then I fill in the right hand side of field beads and rom top to bottom, then rotate the board and fill in the other side of the field. Finally I add the border of darker beads and the outer border of black beads.

I found it easiest to scoop a large number of beads into my one hand and then simply put them into the board one at a time with the other. You can use tweezers (including the ones that perler sells, which have a great scoop attached to them) or toothpicks to set the beads into the board, but I found that to be relatively unhelpful.

I also found from time to time that it was necessary to remove the cat from the pegboard before continuing...

The Ironing (is delicious)

Once the beads were in place and ready (and maybe had sat on my shelf for a few months?), it was time for fusing the beads. I set up an old chopping board on the ironing board as a surface to work on.

My setup

My iron is slightly difficult to calibrate since it measures in fabric quality, but I eventually found that the "wool" setting worked best for me. This gave me slightly more time than I had on the "cotton" setting. I  find that the beads can go from unmelted to melted quite quickly. Some people aim to totally melt the beads to get a more pixelly effect, but I actually like having the holes visible a little still, so it's a bit of an art to get the balance correct and will be a thing I need to learn with more practice.

I find I still tend to get more melting done on the right hand side of the sprite than on the left. I need to remember to rotate the sprites more frequently as I iron them. Some kind of lazy Susan would be useful. For me the beads melted in about 3 minutes, once I had pretty good fusion, I flipped them off of the board and switched the paper to the other side and continued ironing them for about 2 more minutes.

I started using the parchment paper that came packed in with the multi-pack of beads I purchased, but it was folded into about 4cm squares which left creases in the sprites. They recommend ironing the paper before beginning to remove that crease, but I wasn't able to. In the end I just picked a larger piece of paper to protect the beads and the iron.

The sprites tend to cup when they're finished, so I pressed them under a stack of books to help them stay straight. We can thank Alton Brown for keeping my coasters flat as well as all the things he's taught us about food. I kept the coasters in the bookpress for several days (but some of that also included time after they'd had the backing put on). I also put the coasters between sheets of parchment, just to make sure nothing transfered to the books, but I assume this was largely unnecessary.

The Backing

In order to both help the coasters stay together and to help keep them from scratching I added a felt backing. I opted for a thin stiffened felt with an adhesive back. I cut the backing into squares just smaller than the coasters and then trimmed the corners to ensure that the backing didn't stick out and ruin the look. I cut the squares using a hemming ruler for measurement and then trimmed the corners with the guide of a template.

It's important not to cut the backs too small or they'll cause the coasters to be tippy, and also provide less support to the beads.

The Finished Product

The final coasters.

So far they seem to have worked quite well. After they were pressed for several days they seemed to stay flat (the backing may have also helped with this). They are be a bit smaller than I'd like, they're great for bear bottles, but a little small for some mugs. It's possible on a later run that I'd add an extra ring of the darker coloured beads, but I haven't really seen what that's like yet. I've used them for one D & D session so far and they lived up to expectations.

I'm quite pleased with these and am now looking forward to tackling a few more projects. I'm feeling tempted to see if I can make sets of coasters on Etsy, but I haven't really started to look at whether that would really be a good idea or not. Beyond that I'm going to keep working on the coasters, both using Mario blocks and some other SNES Sprites that will make good coasters too.

And the coasters in use.

Project 5 : SNES Geek Coasters

One of the problems I face on a semi-regular basis (at least whenever I host a D & D session) is that I don't have enough coasters and that the coasters I do have are just not cool enough. Fortunately the Internet has reminded me that this doesn't need to be an on-going problem and that I can do something cool to fix it.

As such, my next big project is going to be SNES Geek Coasters made from pearler beads.

I was inspired to this idea from two sources, one is a mario coin I bought at the Calgary Comic Expo this year and the other is a set of fridge magnets I saw on Pinterest (which were mis-labeled as coasters).

The coin over my desk. From my photo-project with a friend Seven-Fifty-Two-by-Two.

Fridge Magnets with retro style - found on Pinterest sourced from gadgetsin.com

Pearler beads work well with retro-video game concept because it's easy to put beads in for each pixel. This means that all I have to do to find plans is to hunt down the sprite sheets for any game I'm looking for. Then all I have to do is match the beads to the pixels, load them onto a hedgehog tray and iron. Or not, this may prove to be harder than I've imagined, but I do have my childhood memories saying this is pretty easy and it may be harder to get the sprites that I want.

My first thought was to go with the question mark blocks from Super Mario World, but the more I've been thinking the more I'm interested in trying for some RPGs of the era (Secret of Mana especially) since they're likely to get hauled out during RPG session most often.

My goal is to have at least a prototype version of these up and running by November 1, 2012.